The 1U dual powered iSensor Controller is a cost-effective, out-of-the-box data centre temperature and humidity monitoring system which provides a proactive solution for monitoring the environment in data centres and server rooms. The dual-powered iSensor Controller unit features 24 iSensor ports into which installs a combined temperature and humidity sensor. The temperature and humidity sensors connect to the controller unit via standard CAT5/6 network Ethernet cabling. This enables each of the sensors to be a maximum distance of 100m away from the iSensor controller box. Optional environmental sensors are also available to monitor particles and dry contacts. Access can be through web browser via the internal webserver or integrated into a remote management platform (NMS, BMS, DCIM etc.) using SNMP.
24 iSensor sensors – Each controller provides 24 iSensor ports for connecting Temperature & Humidity sensors for deployment across the data centre utilising standard CAT5/6 cabling (to a maximum distance of 100m).
High/Low Alarm thresholds for Temperature and Humidity – Option to set individual High and Low Alarms for both Temperature and Humidity on each sensor.
Monitoring/configuration via web browser and/or SNMP – Monitoring of the iSensor Controller is possible over an Ethernet network via an internal web server, and SNMP registers.
E-mail notification – Event notification through SNMP Traps are generated when thresholds are breached or contact status changes.
SNMP Traps – Event notification through SNMP Traps are generated when thresholds are breached or contact status changes.
Optional Particle Sensors – Particle sensors enable the monitoring of dust particles in the data centre environment.
Optional Volt Free Contact Sensors – Optional Volt Free Contact sensors are available for monitoring and alerting of status changes.