Advanced Datacentre Systems Limited manufacture essential Data Centre hardware. The iAccess and iSensor dual powered Controllers are complimented by a range of sensors for measuring and monitoring temperature, humidity, particle and dry contact. Their internal webserver allows access by standard web browser.
Let one of our experts help guide your decision.
The iAccess Controller 1U dual powered, rack-mountable design utilises smart card access control technology and is ideal for use in data centres and remote IT rooms, thanks to its internal webserver that can be accessed via standard web browser.
Alternatively, it can be integrated into any data centre remote management platform (NMS, BMS, DCIM etc.) that uses SNMP to provide a centralised accessed control system, which also offers a full SNMP Audit Trail.
The 1U dual powered iSensor Controller is a cost-effective, out-of-the-box data centre temperature and humidity monitoring system which provides a proactive solution for monitoring the environment in data centres and server rooms. The dual-powered iSensor Controller unit features 24 iSensor ports into which installs a combined temperature and humidity sensor. The temperature and humidity sensors connect to the controller unit via standard CAT5/6 network Ethernet cabling. This enables each of the sensors to be a maximum distance of 100m away from the iSensor controller box. Optional environmental sensors are also available to monitor particles and dry contacts.
The Advanced DataCentre Systems iSensor Temperature and Humidity sensor is designed to work with both the iSensor and iAccess Controllers. When connected to one of the available sensor ports on the controller, via standard CAT5/6 network Ethernet cabling, it is possible to provide a proactive solution for monitoring the environment in Data Centres and Server Rooms.
The Advanced DataCentre Systems iSensor Particle Sensor is an optional sensor used to count particulate matter (PM) in the air and report the density and particle size to the connected iSensor or iAccess Controller.
The Advanced DataCentre Systems iSensor Volt Free Contact (VFC) is an optional sensor which can be used to send open/closed signals to remote management platforms such as NMS, BMS, DCIM etc.
The Advanced DataCentre Systems iSensor Carbon Dioxide sensor is designed to work with both the iSensor and iAccess Controllers. The sensing element provides C0², temperature and Humidity data. When connected to one of the available sensor ports on the controller, via standard CAT5/6 network Ethernet cabling, it is possible to provide a proactive solution for monitoring the environment in Data Centres and Server Rooms